How to fix 0xc0430001, 0xc0000098 Error [BSOD]

* As a computer novice, this post is just my attempt at trying out various things, 
   so it may not be a foolproof method...

Everyone who uses the Windows OS may encounter at least once...

The dreaded blue screen! 
Also known as the Blue Screen of Death (BSOD), 
the causes and solutions for this phenomenon are so diverse that 
if you don't have much knowledge about computers, 
you might indeed feel a sense of dread. 
It's okay, even those who are computer savvy 
may not find encountering the blue screen a pleasant experience.

I myself don't have many experiences with this, 
so with the help of my younger sibling and some appropriate searching, 
I was able to resolve it. I thought I'd write about that experience here.

You might wonder why I'm bothering to write about it 
when all the information is readily available through a simple search... 
Just because I felt like it? Hehehe. 
Also, because information is scattered all over the place, 
and sometimes it's easy to get lost in figuring out what to do.

---

0xc0430001  Error Message

 

*The original text and the screenshot are both in Korean. 
  Your understanding would be greatly appreciated.

let's start by taking a look at the content. In cases like this, it's best to check the "error code," 
but even if you search, you won't find any convincing results for the error code 0xc0430001. 
If anyone happens to encounter this code and feels confused, following the steps below might be helpful.

It seems like this case is extremely rare. There is hardly any information available.

Keep calm!

According to the explanation at the bottom of the error screen, 
pressing F1 or F8 should solve the issue. Let's give it a try.

• If you press F1
  The system will attempt to reboot, but there is a very high chance that the same screen will appear again.
• If you press F8
  The following screen will appear.

To make a selection from the options below, press the corresponding number key.

Use the number keys or function keys (F1-F9):

1. Enable debugging
2. Enable boot logging
3. Enable low-resolution video
4. Enable Safe Mode
5. Enable Safe Mode with Networking
6. Enable Safe Mode with Command Prompt
7. Disable driver signature enforcement
8. Disable early launch anti-malware protection
9. Disable automatic restart after error"

You can press keys 1 through 9 on the keyboard without worrying. 
Since it's already stuck, there's no harm in trying, as there's no risk of further complications. 
I managed to keep my composure, barely suppressing the expression of panic on my face, and pressed each number.

The only meaningful response I got was "pressing number 7".

---

Then the screen that appears is as described, stating that "recovery tools need to be used." 
Upon closer inspection, I noticed that the error code has changed to 0xc0000098. 
This code seems quite common, as just typing "0xc" brings up all sorts of auto-suggestions. 
It's prevalent enough to find numerous results even on Search Engines.

However, each solution varies greatly, 
and even referring to a specific blog didn't provide significant help in my case. 
According to the explanation of the error, ultimately, 
it seems that recovery tools are needed. You may need to prepare for formatting as well.

---

0xc0000098 Error Message

 

Let's create an operating system recovery drive.

You'll need to download the Windows OS installation files onto a CD or USB, 
and this needs to be done using another computer. 
I'll refer to instructions from another blog for this step. 
Considering the modern era, it's recommended to directly download the recovery drive onto a USB.

Create a recovery drive - Microsoft Support

How To Create And Use System Recovery Drive In Windows 10

---

Let's change the boot order.

First, shut down the computer, then plug the recovery drive you created earlier into the computer. 
The method for changing the boot order varies depending on the motherboard installed in the computer.

"What's a motherboard? What's booting?" 
These terms aren't important. 
Simply put, think of the CPU as the computer's brain and 
the motherboard as the nervous system that ensures the computer's functions run smoothly.

Usually, right after booting, if you repeatedly press the F2 or Del (Delete) key before the logo appears, 
you'll enter a special screen called the "BIOS setup"

• Acer: F2 or DEL
• ASUS: F2 for all PCs, F2 or DEL for motherboards
• Dell: F2 or F12
• HP: ESC or F10
• Lenovo: F2 or Fn + F2
• Lenovo (Desktops): F1
• Lenovo (ThinkPads): Enter + F1.
• MSI: DEL for motherboards and PCs
• Microsoft Surface Tablets: Press and hold volume up button.
• Origin PC: F2
• Samsung: F2
• Sony: F1, F2, or F3
• Toshiba: F2

Depending on the motherboard manufacturer, you might not be able to access it, 
so you may need to refer to a blog link for help!

How to Enter BIOS Setup on Windows PCs | HP® Tech Takes

If you don't know the motherboard manufacturer, 
you'll have to try pressing F2, Del, or any other key to enter manually. 
It's a hassle to open up the computer, after all...

---

Source: MSI Official Website Help

While each manufacturer may display different screens, the interface will likely be similar. 
The manufacturer name at the top left corner, such as MSI, indicates the motherboard manufacturer. 
Some may see Samsung, ASUS, and others.

What we need to do here is to change the boot priority, labeled as "Boot Order Priority" or similar.

In the case of MSI, you can either drag the USB to the far left in the section from"Boot Priority" at the top, 
or navigate to Settings - Boot option #1 - and change it to the USB where the recovery drive is installed. 
Other manufacturers will likely have similar methods, but there may always be exceptions, 
so I recommend directly searching on Google for 'manufacturer + BIOS screen + changing boot order.'
There's usually an official manual provided by the manufacturer.

---

Once you've changed the boot order, 
go ahead and shut down the computer. 
Then, turn the power back on to see if the changes take effect.

Now, the computer should boot using the recovery drive installed on the USB as the primary option. 
After this, press 'Next' and then click on 'Computer Recovery' located at the bottom left.

Press 'Troubleshoot,' then try 'Startup Repair' first.

If the issue is resolved here, you're really lucky. 
However, there are many cases where it doesn't work,
and I've experienced that too. Now, let's try several last resorts.

---

After rebooting, let's go back to the [Options selection - Troubleshoot] as mentioned earlier.
Then, enter [Command Prompt].

---

Let's locate [Program Files] menu. 

명령 프롬프트에 진입하면, 익숙한 창이 하나 등장할 것이다.

보통 블로그 설명을 보면, C드라이브를 기준으로 하여 설명하는 경우가 많다.
다만 예외적인 경우, 나처럼 D드라이브에 운영체제가 설치된 경우도 있어 괜히 시간을 낭비하는 수도 있다
Once you enter the Command Prompt, a familiar window will appear.

Many blog posts often refer to the C drive when explaining this.
However, in exceptional cases like mine,
that the operating system is installed on the D drive, it could waste time if you follow instructions blindly.

dir c:

dir d:

Try entering 'dir c:' (NOT capital letters), and also try 'dir d:' 

 

Then you can see where the 'Program Files' directory is located on which drive.
If it's on the C drive, there's no need for any additional steps,
but if it's on the D drive, you'll need to take a bit of extra effort.

If it's on the D drive, you'll need to add the following inputs:
Think of this as changing the target to the D drive for the methods you'll apply.

cd d:\
d:

If the 'Program Files' directory is on the D drive,
enter the above commands into the command prompt. If the \ appears as another letter, that's fine too.

 

---

Disk Check!

There are various solutions being suggested for the blue screen issue,
but in my case, disk check seems to have been the most helpful.
It's actually a surprisingly effective solution!

chkdsk C: /f /r /x

or

chkdsk D: /f /r /x

Let's perform a disk check by entering either C: or D:
depending on the location of Program Files we examined earlier.
Remember, It should be entered in uppercase!

Then the disk check will proceed as described.
It's common for the estimated check time to be quite long, depending on disk capacity.
For example, on a disk with 450GB, with about 82GB in use, it took approximately 1 hour and 30 minutes.

This process includes repairing any problematic areas found during the check.
After completing the disk check, remove the USB and restart the computer.

---

If it still doesn't work...

bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd

You can perform a disk check by entering the command as described above.
However, in my case, at the second step, I encountered an "Access Denied" error;
which many others have experienced as well.
I was also quite surprised when the Windows installation count showed 0 instead of the expected 1.

When you search, you'll usually find this method mentioned the most, but it didn't work for me at all,
so I tried using chkdsk as mentioned earlier!

In cases where "Access Denied" occurs, you can use chkdsk as mentioned earlier, or...

---

If the above methods don't work...

 

You can try...

sfc /scannow

This method is also about detecting and fixing issues, similar to using chkdsk!

If none of these work, then unfortunately, calling a repair technician may be the only option. It's a tough situation!

---

After trying the methods mentioned above and rebooting without the USB, 
you'll see your familiar desktop as usual. 
It's a relief to see it, like greeting an old friend!
Plus, there was no data loss!

Summary

1. Create a recovery drive on a USB, plug it into the computer, and change the boot order.
2. If the computer boots into recovery drive mode, try Startup Repair.
3. Find the drive where Program Files is installed.
4. Run chkdsk.
5. Try the fixmbr method.
6. Try the sfc /scannow method.
7. If none of these work, trust in the expertise of an official repair technician.